Actisense EMU-1 motorovervåkning fra analog til NMEA 2000

PrisNOK5 369,00 ekskl. mva.
Artikkelnr.:
EMU-1-BAS
Produsent:
Actisense
  • Produktinfo
  • Video
  • Teknisk spesifikasjoner
  • Nedlastning

Actisense EMU-1 er en analog til NMEA 2000 Gateway som konverterer data fra analoge motormålere / avsendere til NMEA 2000-data.
EMU-1 muliggjør deling av motordata gjennom NMEA 2000-bussen.
EMU-1 digitaliserer analoge motorsensorer, slik at NMEA 2000-skjermenheter kan overvåke den eller de tilkoblede motorene på et fartøy.

EMU-1 kan overvåke viktige motorparametere som temperatur, trykk RPM og væskenivå fra opptil to motorer.

  • Den støtter opptil to motorer med en enkelt EMU-1
  • Seks måler / parameterinnganger
  • Fire alarminnganger
  • To Tach-innganger
  • Støtter 12V og 24V systemer
  • Skottmontering, med valgfritt monteringssett for DIN-skinne
  • Totale motor timer logges ved overvåking av motorens turtall (RPM)
  • PC-basert konfigurasjonsverktøy for tilpasset installasjon

Power Supply
Supply Voltage 9 to 35V DC
Supply Current Typically < 25mA @ 12V DC
Supply Protection Continuous reverse polarity protection and load dump protection (meets SAE J1113)
Supply Connector Pluggable 2-way screw terminal, 3.5mm pitch
Supply Voltage (NMEA 2000 Port) 9 to 29V DC
Supply Current (NMEA 2000 Port) < 20mA @ 12V DC from NMEA 2000 bus
Load Equivalent Number (LEN) 1
Supply Protection (NMEA 2000 Port)

 

Continuous reverse polarity protection and overvoltage protection to 40V

 

NMEA 2000 Port – In/Out
Compatibility Fully NMEA 2000 certified
Galvanic Isolation 2500V input to ground, 1500V output to ground using ISO-Drive
Speed / Baud Rate 250kbps
NMEA 2000 Connector

 

M12 male (A coded) connector

 

Gauge Inputs
Voltage Range 0 to 35V DC
Input Impedance > 50kΩ
Sender Feed 0, 4 or 18mA
Accuracy <= 2%
Input Connector Pluggable 6-way screw terminal, 3.5mm pitch
Input Protection

 

Overvoltage protection to ±40V

 

Alarm Inputs
Voltage Range 0 to 37V DC
Input Impedance > 50kΩ
Threshold Voltage Configurable, default is 5V
Alarm Polarity Configurable, default is alarm on low input
Accuracy <= 2%
Input Connector Pluggable 4-way screw terminal, 3.5mm pitch
Input Protection

 

Overvoltage protection to ±40V

 

Tacho Inputs
Voltage Range ±3 to ±60V
Input Impedance > 100kΩ to ground
Input Pulse Range 4 to 50,000Hz
Accuracy <= 1%
Sender Compatibility Ignition coil, alternator (“W”, “R” or “AC”) terminal, hall effect, VR or inductive sender
Threshold Automatically adjusts to signal level
Input Connector Pluggable 4-way screw terminal, 3.5mm pitch
Input Protection

 

Can withstand an ignition pulse to ±500V

 

Engine Log
Engine Hours

 

2 separate engine hour logs internally connected to the tacho Inputs. Hours are logged when RPM is present, stored in non-volatile memory

 

Mechanical
Housing Material Polycarbonate
Protective Lid Material Polycarbonate
Sealing Materials Expanded silicone foam gasket, closed cell polyurethane splash guard and ePTFE waterproof vent
Dimensions 127mm (L) x 112mm (W) x 48mm (H)
Weight 250g
Mounting

 

4 x 3.5mm lugs to allow panel mount with self tapping s/s screws (included), optional DIN Rail mount available on request

 

Approvals and Certifications
Fully NMEA 2000 Certified
EMC EN 60945 (sections 9 & 10)
Environmental Protection IP66 (PCB housing)
Operating Temperature -20°C to +55°C
Storage Temperature -30°C to +70°C
Recommended Humidity 0 – 93% RH
Guarantee 3 years